Getting the telescope back on its feet
Posted by Wesley on
Jupiter and Saturn on April 8, 2018
It's been about two years since I did astrophotography with my Celestron telescope. When I finally took it out of storage to take the photos of ISS recently, I noticed that the shots weren't as clear as I expected. The same problem came up as I tried to take photos of the Orion Nebula yesterday, and I realized that the collimation of the telescope was significantly off. After about an hour of fiddling, the problem was fixed and I was able to see the bands of Jupiter and the Cassini Division on Saturn again. It looks like I'm good to go for the next few months of observation, including the closest approach of Mars on July 31. Here are the photos of the two planets in the order of original (from 4K 60fps recording), stacked, and wavelet processed results. Resolution was roughly 0.32"/pixel due to the iPhone X having slightly wider lens than iPhone 6S Plus.
The look of Jupiter before and after collimating the telescope
Telescope: Celestron NexStar 6SE + X-Cel LX 9mm eyepiece
Device: iPhone X (afocal)
Settings: 28mm - ISO 50 (Jupiter) / 250 (Saturn) - 1/60s - f/1.8
Filters: None
Date/Time: 2018-04-08 05:18 (Jupiter) / 05:30 (Saturn) KST
Location: Naju, Korea
100 (Jupiter) / 46 (Saturn) photos stacked with PIPP 2.5.6 and RegiStax 6.1.0.8
