Wesley's Tool-Box

Apple acquired AuthenTec back in 2012, and a lot of rumours circulated about the possibility of iPhones using fingerprint sensors created by this company. Come 2013, this has come true in the form of an integrated fingerprint sensor called Touch ID on the home button of iPhone 5S. In the process, the iconic rounded square marking in the button was sacrificed in the name of progress. The physical button is still clickable as always. The sensor works only when you leave your finger on the button without clicking.

Many experts view biometric authentication such as fingerprint scanning as a good way to "augment" security. It is by no means a complete replacement for existing measures because you can't change your biometric characteristics, and the detection can be fooled with sufficient resources and will. So it's generally recommended that this is used in conjuction with another authentication method such as ID & password. That said, Apple has decided that it's good enough to be used as an alternate method of entering passcode for unlocking lock screens.

This doesn't sound good from strict security standpoint because the biometrics are used to "replace" rather than "augment". However, Apple's rationale is that a large number of people don't even set passcodes, and by providing this alternative in a convenient package, phones would be somewhat secure, than not secure at all. Then, the convenience angle must be sufficiently strong to gain traction.

Using this feature for some time, I can say that this would indeed be the case. Read on to see my demonstration.

Apple has constantly improved the iPhone camera's overall quality over the years, and this time is no different. It has touted iPhone 5S's larger sensor (1/3.0", compared to 1/3.2" in iPhone 5) that results in bigger pixels (1.5 microns instead of 1.4) and brighter lens (f/2.2 instead of f/2.4) that lets more light in. These are supposed to gather 33% more light, and low-light performance would be improved as such. One thing not mentioned is the focal length. Both devices are fixed to 4mm, but 35mm equivalent values are different - iPhone 5 is 33mm, while iPhone 5S is 30mm. This means the latter has a slightly wider field of view.

iPhone 5's camera already takes great outdoor shots, so I felt that improvements from these upgrades would be most noticeable in indoor shots. Therefore, I decided to use both iPhone 5 and 5S to take several comparison photos in the house, with iOS version both at 7.0.2. First one shown here is taken in a brightly lit room, and the low ISO value tells you that the sensors should be subject to minimal noise. This should be typical of the photos that were taken with good lighting. You can see that both phones perform similarly, but iPhone 5S does apply slightly more smoothing. This makes the 5S photos in good lighting conditions look a little too clean. Fortunately, the details are mostly there and the file size did get a bit smaller on average as a result. This seems to be more or less the difference in post-processing pattern than the sensor performance itself.


When the lighting is dramatically reduced, the difference in sensor performance becomes evident. The photos here were shot with identical ISO and shutter values, yet iPhone 5S's photo preserves the details of the objects and letters much more than iPhone 5's. You can make out the letters with 5S, while 5 gives you muddled goo. Both had noise reduction kicked in, but it iPhone 5 clearly had less detail to work with in the first place. Apple's efforts are paying off here.

Of course, camera module itself is only half the story. Let's take a look at a photo in even worse lighting and go from there.

One of the key improvements of iPhone 5S over previous generations would be the camera's performance. In this segment I'll look at the speed at which it can operate - namely, how fast the video and still photos are recorded.

1. Video

iPhone 5S introduces the "slo-mo" mode with 120fps capture at 720p (1280x720). What it actually does is that the phone records the video at 120fps fully. Then, when you view the video in the camera roll via the Camera or Photos app, a portion of the video is played in slow motion by reducing the playback speed to 30fps.


This results in playback at 1/4 the speed for the selected "zone". You can adjust where the slow motion starts and ends by moving the sliders just below the frame strip. One drawback is that you can't set two or more zones. You'll need a separate editor or app to achieve this.

Also, there are some interesting consequences when exporting the video clips.

UPDATE (Sept. 25, 2014): There has been some changes in activating LTE devices from overseas in Korea. [Read the related iPhone 6 Plus review.]

When my friend Andy lined up to get the new iPhone 5S, the Apple Store had specific supplies of the phone for each of the four major U.S. carriers. If three of the carriers supposedly use the same model as seen in Apple's website, it might seem strange that this division existed. It turns out that each of the phones have a SIM card for the designated carrier, as well as some specific device status configured (SIM lock, CDMA enable). As you can see, Andy got me an AT&T version of the iPhone 5S with model number A1533, with the AT&T NanoSIM as a proof.

Now, Apple mentions that the model number of the iPhone 5S planned to be released in Korea is A1530, which forgoes the AWS and 700MHz bands used in North America and instead supports TD-LTE bands used in places like China. Interestingly, both models (as a matter of fact, all models) support LTE bands currently active in Korea, so it seemed likely that A1533 iPhone 5S would be able to hop onto LTE networks in Korea. This was the reason I risked buying A1533 outright instead of trying to get A1530 from Hong Kong or wait for official Korean release. It turns out my hunch was correct, but it's not completely plug-and-play. Read on to minimize the chances of bumping into problems.

As my Twitter followers are already aware, my iPhone 5S arrived in the mail just before noon last Friday, September 27. My second daughter immediately had an early "hand-on" with the package. Since the device was released just 7 days before to only a handful of countries, this is no doubt one of the first iPhone 5S to land in Korea. No date has been set for Korean release yet - past experiences indicate November-December timeframe - so I'm going to be using this shiny new toy on behalf of other Koreans to see if this is something to wait for.

This particular phone was meant to be used on AT&T network in the United States. But my excellent friend Andy, who lives there, kindly picked it up along with his after lining up at an Apple Store on the morning of the launch day. It then crossed Pacific Ocean again to come into my hands. Naturally, this raises several questions - how well does it work in Korea, how different is it from the previous model, and so on. For this segment, I'll give my first impressions.