Wesley's Tool-Box

쓰던 프로그램 그대로.
저장위치만 바꾼다.

From "Wesley's Filling Up of Empty Space" at Naver Blog - August 2005

기본메모리에 설치되는 네이버 블로그 파일업로더를 Nand (매직엔스토어)에 옮긴 후 정상작동하는지 테스트... 자료가 보이면 성공. 요 사진은 방금 지하철 속에서 찍은 것..!

From "Wesley's Filling Up of Empty Space" at Naver Blog - August 2005

흠 그런데 기본메모리 60kb가.... T_T

From "Wesley's Filling Up of Empty Space" at Naver Blog - August 2005
This was the first 'mobile blog' entry posted from the PDA-phone, Cyberbank CP-X301.

• Step-by-Step Wearing

In the order of left-to-right, top-to-bottom fashion, I've illustrated how my wearable computer is being worn and operated.

1. The wearable computer is casually worn on the left side of the body. I've found out that practically no one suspects this as a computer.	2. To use, the monitor is first taken out and the straps are extended out so that it could be used to attach the monitor to the left arm.
3. This is how it looks with the monitor attached to the left arm.	4. Now the keyboard is taken out and put on the right arm.
5. Now the computer is ready to use! The power button on the system is pushed to boot.	6. Quake 3 Team Arena is being played on the system. The keys were reconfigured to work better on the HalfKeyboard.

 This concludes the part one of the Wearable Computing Project. Stay tuned for Part 2, where the computer gets more functionality, and runs through benchmarks as well. You are wondering how good a framerate this unit pumps out since I'm playing Quake 3 on it?

• Overall Presentation

Now I can show you the individual close-ups of the system. They are not the current look, as they will be shown in the Part 2 of this article later on since it is more relevant there. First, the main system, comfortably enclosed within a modified tote bag.

The whole thing measures a bit longer than 20cm either way. The picture on the left shows how the system looks like when not in use. Notice that there are two battery packs, as mentioned earlier. The unit weighs approximately 2.5kg. The battery pack and the system is responsible for nearly half of the weight, each. The picture on the right shows what happens if I decide to use it. I've made a ventilation hole so that the CPU doesn't suffocate and overheat. You can see the monitor cable sticking out at the top, which resembles a casual IDE data cable. It's actually narrower than that, but due to the tight pin-out, it has 44 wires. You could say it's mechanically (not electrically) compatible with the 2.5" hard disk's IDE cable.

On the left, you can see how the power supply receives power from the batteries. I've made a small circuit that harness the power from the batteries and combine them in serial fashion, sending 30V DC to the power supply. On the right, the input devices were taken out for a showing. The trackball is loaded into the left side pocket, while keyboard goes into the right side one. The earphones are housed in a case that's attached on the flap of the left side pocket. The case is detachable because it is attached via Velcro. Now let's see how it looks like when I wear it.