Wesley's Tool-Box

Continuing from where I left off yesterday, I proceeded to put the rest of the Makibox A6 HT parts together. The X and Y axes that will accommodate the printing head was installed. This part was fairly easy. The rest of the parts that needed to be assembled were the stuff that fed and printed the plastic filaments, and the cover panels. Read on to see how they look like.

After the Christmas festivities died down and the kids were put to sleep, I got to work on building the Makibox A6 HT. The kit had an assorted array of plastic and metal parts, as well as some pre-built parts like the main circuit board and nozzle. It also came with a detailed (but slightly buggy) assembly instruction.

If things went smoothly, I would've finished building it and had some time to sleep. But apparently that would not be the case. Hiccups along the way dragged down the build speed, and I could only finish about half way through before getting one hour of sleep and going to work. If you want to hear what happened, keep reading.

In contrast to the flare spotted in the less light-polluted spot, Iridium 52's flare in the low altitude among one of the heaviest light pollution in the country is far less dramatic. Even the -5.2 magnitude brightness is nearly washed away in the background. See the YouTube video below for the faint flare in action.


Device: iPhone 5S
Settings: 30mm - ISO 1250 - 1/15s - f/2.2
Time: 2013-12-24 18:29 KST
Location: Seoul, Korea