Reducing water usage (Part 1)
Posted by Wesley on
Softrong SKJ-60 kitchen faucet and SH-50 shower head
Not being content with just saving electricity, I looked for more ways to reduce monthly bills. There were two major pay-by-usage categories left: heating and water. With heating during last winter, I did some active manual adjustments instead of blindly relying on the thermostat, resulting in significant savings compared to last year. Sadly, it would be difficult to write this up. With water, there needed to be either some change of habits or hardware to see improvements. I did find the right hardware for the job, so I'm going to tell you about it.
Tiny rounded triangular holes produce strong streams with less water
It wasn't that my family members were particularly wasteful in terms of using water. In fact, overall water usage was consistently below average for the apartment complex. But hot water usage was above average. I guessed that this was due to heavy reliance on hot water during showers and dishwashing. So I bought some water-saving faucets from a company called Softrong in late February. By puncturing tiny, 0.25mm (0.01") holes on a stainless steel sheet for water to come out instead of using wider (~1mm) plastic-molded holes, the faucets supposedly produce stronger streams with less water, significantly cutting the amount of water used.
