Wesley's Tool-Box

I was quite surprised to see my Apple Watch Series 2 having more than 60% of battery on the first day of use. To see that this was not a fluke, I kept checking for a few more days and realized that it usually had 50% or more left after 24 hours with light use. In such cases, I was able to go without recharging for two full days. This is quite a bit longer than the Apple Watch Gen 1 even compared to its early days. So to make this clear, I did a comparative battery discharging test to produce the graph below. The devices had watchOS 3.0 installed at the time.


Apple Watch Gen 1 lasted 24 hours 45 minutes, while Series 2 worked for 38 hour 50 minutes, about 57% longer. For Series 2, it still effectively meant two days' use - have it fully charged on the morning of day 1 and it will last until late evening on day 2. You can also see that if there was less activity, 48-hour use would have been possible as well. What's more interesting is how much battery is consumed for certain activities.


During regular office work, the drain rate is similar for both watches. But once they're subject to more demanding tasks like logging an exercise or actively running apps, Gen 1 tends to drain about twice as fast. The idle state shown by the sleeping time is also less efficient compared to Series 2.

Early parts leak showed that Apple Watch Series 2 42mm models have about 36% larger battery compared to Gen 1 (334mAh, from 246mAh). So the difference isn't just coming from a larger battery, but an even more energy-efficient system overall. Considering that Series 2 has a CPU twice as fast and a screen twice as bright, this is quite a feat.

Now, it's been suggested that Apple put a larger battery on Series 2 because it includes a GPS module. This would enable path logging without a paired iPhone at an expense of a faster battery drain. So let's see how much difference it makes.

To compare the battery life of the Gen 1 and Series 2 Apple Watches in a fair manner, I wore both devices on the same arm for as long as the device's battery lasted. In doing so, I was also able to see if there were any differences in the logged activity data. I'll be talking about this first.

I should note that this test required carrying two iPhones, one for each watch. While Apple did introduce 'auto switch' feature in iOS 9.3 and watchOS 2.2 to let a user use multiple Apple Watches, only one watch can be active at a time. So to log the activities independently and simultaneously, I paired Series 2 to iPhone 7 Plus and Gen 1 to iPhone 7. The phones were in my pants so that they would always be close to the watches. Both had been through more than 20 minutes of calibration walks before the testing as well. Let's see what the final results of this walking session.


The calorie and heart rate measurements were nearly the same, meaning that both Apple Watches saw nearly the same amount of activity. This is assuring as the measurement back-end for the workout session is consistent across generations.

Nearly a decade ago, you would have seen me wearing all sorts of gadgets around my waist, as evidenced by this television broadcast. The problem with this was clearly illustrated in that video - it takes a bit of time to put them all on the belt, however useful they may be.

I haven't let go of the carry-them-all attitude, but things have worked in my favour. A lot of the gadgets I had to carry separately were now integrated into a single device (smartphone). That meant less stuff to carry, and I was able to reduce the number of pouches and bags on the belt over the years. I ended up with a phone and an external battery each in a holster, and a bag that held adapters, cables, and other miscellany.


But then large iPhones came along. When I put it on my belt, it occupied a sizable area of my waist. This got me thinking: since the phone is thin enough, maybe I could put it in a belt bag that can store other stuff with it. And this is how I now just have this one bag hanging from my waist.

As you can see here, my iPhone 6S Plus and the slim external battery fit nicely into the front pockets of the bag. They're accessible by opening up the flap usually held in place with a hook-and-loop fastener. I also have a paper clip there in case I need to change the SIM card or poke a reset button.

Of course, there's a lot more hiding behind. Let's take a look at the rear compartment.